Peli 1510TP TrekPak Insert

Peli 1510TP TrekPak Insert

Fits: Peli 1510 Case
Now £95.97 (£115.16 inc. VAT)
  

Special order, delayed dispatch - Up to 7 days

Peli Trade Shop
  (4 Reviews)
Part Number:  015100-5050-110E
Brand:  Peli

TrekPak divider system for the Peli 1510 Protector Case. A TrekPak insert allows you to customise the layout of your Peli 1510, making optimal use of its available space while keeping the equipment inside nice and protected. The Peli 1510TP TrekPak Insert contains the following:

  • two perimeter pieces
  • two 45.7cm dividers
  • two 38.1cm dividers
  • 20 pins with 20 red pull tabs
  • lid and base foam
  • one cutter tool

TrekPak Instructions

Installing TrekPak is straightforward. It uses a simple 'MEASURE-CUT-PIN' technique that will see your dividers installed in no time.

HOW TO INSTALL TREKPAK INTO A PELI CASE:

  1. TrekPak

    1) Open your case and insert the base foam and lid foam into your Peli case, gently pressing at the edges to secure them.

  2. TrekPak

    2) Insert the perimeter pieces next. This is what forms the protective wall around the interior of your case. The perimeter pieces will already be pre-cut to the shape of your particular model. (If you have a case with wheels, pay extra attention to how you insert the perimeter pieces because one side will have cutouts to fit around your case's wheel arches.)

  3. TrekPak

    3) When both perimeter pieces are in the case, lock them together using a pin at both joins. Gently press down on the perimeter pieces until the raised bumper line on the outside hits the top of your case. To ensure an extra-snug fit, squeeze the edges of your perimeter while pushing down slightly.

  4. TrekPak

    4) Add your items to the case, choosing a layout that makes good use of available space. You may want to think about which item you'll need access to most frequently when opening the case, and position this one at the front and centre. Remember, dividers will require a straight-line space running between adjacent items, so try to visualise this as you add your equipment.

  5. TrekPak

    5) Measure your first TrekPak divider section by holding it alongside the perimeter of the case and seeing which flute (hole along its corrugated edge) touches the opposing wall. Insert the middle prong of your cutter tool into this flute.

  6. TrekPak

    6) Place the whole divider onto a flat surface, and with the divider held down with one hand, gently pull the cutter tool towards you. The cutter's middle prong and double blade should work nicely together to give you a clean, straight cut.

  7. TrekPak

    7) Place the finished divider section into the case, nudging it down to ensure that your equipment is snug but still able to be removed. Then repeat to create further divider sections as needed.

  8. TrekPak

    8) Attach the red pull-tabs onto your steel U-pins, and insert the pins into the divider foam cavities, connecting different divider sections together at each 'junction'. Don't forget to connect divider sections to the perimeter wall too.

Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating:  
Just superb
Sunday, 22 September 2019  | 

Superb product, exceptional quality

 

This review has not been appraised.


Rating:  
Top Class Service
Wednesday, 16 January 2019  | 

Put everything in its correct place and keeps it there

 

This review has not been appraised.


Rating:  
Super service
Wednesday, 29 August 2018  | 

Excellent item great fit.

 

This review has not been appraised.


Rating:  
Great Company with great products
Monday, 14 May 2018  | 

Frankly, this is the only thing I would use in a Peli case. Strong, versatile and as it's so thin even without compromising the safety, it means you can get so much more in the case.

 

This review has not been appraised.